
Wrench Turners Podcast
By Mr Joshua Taylor

Wrench Turners PodcastApr 05, 2023

Brent Osmond on Wrench Turners Podcast
"If I have 3 hours in the middle of the day, I don't want to be spending it on the phone...." - Brent
....says the guy with the Starbucks coffee order longer than my wife's.
This week on Wrench Turners Podcast
Heavy Equipment Technician, Instructor, and Entrepreneur
Brent Osmond
Dynamic Diesel Solutions
In today’s episode, we talk about:
✅ OSHA isn't funny
✅ Wasting the taxpayers money ain't cheap
✅ Microwaving Double Doubles
J.
—-
I'm Joshua Taylor
I help Automotive Leaders and Mechanics understand each other.
PS: Check out the new Merch
Flat Rate Sucks, Change My Mind!
https://lnkd.in/g9tR8ZcF
And Brent, it's Lock 'N Load ;)

What's your BHAG? - 10 Mill Mastery S7 Ep5 - Wrench Turners Podcast
"Even a shovel can move a mountain, one scoop at a time"
- Stephan Dos Santos
Wrench Turners Podcast
10 Mill Mastery Edition
Series 7 Episode 5
This week's 10 Mill Mastery Topic:
What's your BHAG, Mechanics?
Have you written yours out yet?
The lads:
The 10 Mill Lads and I want to thank you all.
WTP rolled 6000 listens in 21 countries!🙏
Thank you for listening; we hope you enjoy and subscribe.
j.
—-
I'm Joshua Taylor
I help Service Managers and Mechanics understand each other.
Wrench Turners Merch Here: https://lnkd.in/g9tR8ZcF
Wrenches for Wrenches Newsletter Sign up:
www.wrenchturners.online

Mike Baldwin on Wrench Turners Podcast
This week on Wrench Turners Podcast
Servant Leader and Master Certified Service Manager
Mike Baldwin
Pedersen Toyota
In today’s episode, we talk about:
✅ Linkedin Filters and Salvage
✅ Being organized (4 steps is 5 seconds)
✅ Compliance or commitment?
Let's get into it.
J.
—-
I'm Joshua Taylor
I help Automotive Leaders and Mechanics understand each other.
PS: Check out the new Merch
Flat Rate Sucks, Change My Mind!
https://lnkd.in/g9tR8ZcF
*disclaimer - This is an OLD recording. Mike and I recorded back in the spring. For some reason, we had massive difficulties recording, and the audio turned out awful. It took 3 different people to get the audio to the point you hear it now, barely listenable. My sincerest apologies for the quality. Mike deserves better.

Are you covered? - 10 Mill Mastery S7 Ep4 - Wrench Turners Podcast
Your tools are your livelihood as a mechanic... What happens if they're gone in an instant?
Wrench Turners Podcast
10 Mill Mastery Edition
Series 7 Episode 4
This week's 10 Mill Mastery Topic:
Are you covered?
The lads:
Marshall Sheldon
Richard Mueller RSE
Stephan Dos Santos
The 10 Mill Lads and I want positive vibes spread throughout the industry. If you would be so kind, share the show with 2 other mechanics that you believe can benefit from the content 🙏 Folks, we want to hear from you. Where do you stand on dealing with tough customers? Listen or watch the show, and leave us comments on what keeps you up at night.
j.
—-
I'm Joshua Taylor
I help Service Managers and Mechanics understand each other.
Wrench Turners Merch Here: https://lnkd.in/g9tR8ZcF
Wrenchs for Wrenches Newsletter Sign Up: www.wrenchturners.online

Brian Wall on Wrench Turners Podcast
Brian Wall
Licensed Therapist and Life Coach
WINGS Recovery Online
There are too many amazing things happening in this week's episode to say or summarize this Season 2 Finale.
You're just going to have to watch.
You can also find this episode on YouTube:
youtu.be/BmYxs21yidw
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
See you in 2 weeks!
j.
—-
I'm Joshua Taylor
I help Service Managers hit revenue targets.
Click my name + follow + 🔔 for Daily Content to drown your service drive in customer pay work.
....and find the new merch here: lnkd.in/g9tR8ZcF

Mike Abel on Wrench Turners Podcast - Abel Motorworks
"I really enjoy the electrical side of things" This week on Wrench Turners Podcast Content Creator, Shop Owner, and Motorcycle Mechanic Mike Abel Abel Motorworks In today’s episode, we talk about: ✅ From push bikes to motorcycles ✅ Talking to "their" Mechanic ✅ Succeeding from the inside Or check the link in my profile labeled “Content + Business Inquiries” to find past episodes on both. You can find Mike on: YouTube: https://www.youtube.com/@Mike_abel Instagram: https://www.instagram.com/abelmotorworks/ TikTok: https://www.tiktok.com/@abelmotorworks Website: https://mikeabel.co.uk/ If you enjoyed our Season 3 Premier, it would be greatly appreciated if you shared it! J. —- I'm Joshua Taylor I help Automotive Leaders and Mechanics understand each other. Click my name + follow + 🔔 for Daily Content to drive shop wellness and productivity through the roof. PS: Check out the new Merch - Flat Rate Sucks, Change my Mind! https://mr-joshua-taylor.creator-spring.com/

Peter Smith on Wrench Turners Podcast - Lion Partnership
“I Sell 30 cars a month here, I’m gonna go to a big dealership and I’m gonna sell 100” …. Truth or Fairy Tale for a Young Salesman??? Find out on this Wrench Turners Podcast.
Salesman, Marketer, Partner to the people Peter Smith Founder of Lion Partnerships In today’s episode, we talk about: ✅ He who holds the gold, makes the rules ✅ I got a guy ✅ Sending roses to spouses?
Remember, negative pushes, positive pulls, and always remember to clean your toys before you put them away. You can find Peter: Website: https://www.lionpartnership.com/ Email: firststep@lionpartnership.com Phone: (289)297-LION IG: https://www.instagram.com/lionpartnership/ FB: https://www.facebook.com/lionpartnership Li: https://www.linkedin.com/company/the-lion-partnership/ J. —- I'm Joshua Taylor I help Automotive Leaders and Mechanics understand each other. Click my name + follow + 🔔 for Daily Content to drive shop wellness and productivity through the roof. PS: Check out the new Merch Flat Rate Sucks, Change My Mind! https://lnkd.in/g9tR8ZcF

Tough Customers - 10 Mill Mastery S7 Ep3 - Wrench Turners Podcast
Do your due diligence...
Wrench Turners Podcast
10 Mill Mastery Edition
Series 7 Episode 3
This week's 10 Mill Mastery Topic:
Tough Customers
The lads:
Marshall Sheldon
Richard Mueller RSE
Stephan Dos Santos
Folks, we want to hear from you. Where do you stand on dealing with tough customers? Listen or watch the show, and leave us comments on what keeps you up at night.
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow!
🙏
j.
—-
I'm Joshua Taylor
I help Service Managers and Mechanics understand each other.
Wrench Turners Merch Here: https://lnkd.in/g9tR8ZcF
Wrenchs for Wrenches Newsletter Sign Up: www.wrenchturners.online

The Wrench Turner's Podcast - 10 Mill Mastery S7 Ep2 - Safety
Safety, are we taking it seriously...
Wrench Turners Podcast
10 Mill Mastery Edition
Series 7 Episode 2
This week's 10 Mill Mastery Topic:
Safety
The lads:
Folks, we want to hear from you. Where do you stand on Safety? Listen or watch the show, and leave us comments on what keeps you up at night.
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor
I help Service Managers and Mechanics understand each other.
Click my name + follow + 🔔 for Daily Content to drown your service drive in customer pay work.
....and find the new merch here: https://lnkd.in/g9tR8ZcF
Wrenches for Wrenches Newsletter: www.wrenchturners.online

The Wrench Turner's Podcast - 10 Mill Mastery S6 Ep3 - MPI
Are we kicking a dead horse?
Wrench Turners Podcast
10 Mill Mastery Edition
Series 6 Episode 3
This week's 10 Mill Mastery Topic:
The MPI
The lads:
Marshall Sheldon
Richard Mueller RSE
Folks, we want to hear from you. Where do you stand on the MPI debate? Listen or watch the show, and leave us comments on what keeps you up at night.
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor
I help Service Managers hit revenue targets.
Click my name + follow + 🔔 for Daily Content to drown your service drive in customer pay work.
....and find the new merch here: https://mr-joshua-taylor.creator-spring.com/

Wrench Turners Podcast with Corey Smith and Brandon Malicoate
Mopar is the gateway drug to automotive… This week on Wrench Turners Podcast Corey Smith National Fixed Operations Training Manager And Brandon Malicoate Business Income Development & Planning National Auto Care (an APCO Holdings brand) In today’s episode, we talk about: ✅ Radio is the key to training ✅ Process, process, process ✅ Mentorship and Gratitude If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏 j. —- I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners We help Service Leaders elevate technicians and revenue. Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.

The Wrench Turner's Podcast - 10 Mill Mastery S7 Ep1 - Bookclub...?
Reading a book isn't going to make you successful, but understanding what the pages say, and learning what the book means to you and how it applies to your life, just might. Wrench Turners Podcast 10 Mill Mastery Edition Series 7 Episode 1 (episode out of order) This week's 10 Mill Mastery Topic: Bookclub...? The lads: Marshall Sheldon Richard Mueller RSE Folks, the 10 Mill Lads and I want you to join in on reading the book and the conversation as well. The book: Stephen R. Covey The 7 Habits of Highly Effective People Let us know in the comments what you're reading, or if you're going to pick up the book and read along with us! If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏 j. —- I'm Joshua Taylor. Business Development at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners We help Service Leaders elevate technicians and revenue. Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.

Wrench Turners Podcast with Aidan Burns
"Know your place, but also know your value"
This week on Wrench Turners Podcast
Aidan Burns
Apprentice Mechanic
Go Right Fleet Solutions
In today’s episode, we talk about:
✅ Getting a break
✅ Real Dads make the best Foremen
✅ Being thankful
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners
We help Service Leaders elevate technicians and revenue.
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.

The Wrench Turner's Podcast - 10 Mill Mastery S6 Ep2 - Delusional
57% of Mechanics might be...
Wrench Turners Podcast
10 Mill Mastery Edition
Series 6 Episode 2
This week's 10 Mill Mastery Topic:
Delusional
The lads:
...Folks, you'll notice I've chopped a LOT of extras as part of my effort to reduce any time spent during production that I don't believe adds value to the content. If you feel something is "missing", please let me know in the comments, and I'll happily bring it back.
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners
We help Service Leaders elevate technicians and revenue.
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.
PS. I write a Mechanic focused, bi-weekly article too, you can join 1700+ others and sign up here: https://bit.ly/3GsBnI2

Wrench Turners Podcast with Nicholas Lenahan
Treat your staff like children, without treating them like children… This week on Wrench Turners Podcast Nicholas Lenahan Branch Manager Murphy-Hoffman Company (MHC Kenworth) In today’s episode, we talk about: ✅ Ketchup touching the Mustard ✅ Mutual respect ✅ All stick and foot at 4 foot 11 If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏 j. —- I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners We help Service Leaders elevate technicians and revenue. Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level. Gratitude. I don't give it nearly as often as I should. The following is a list of folks and their shows that make me a better leader, interviewer, man, and human being. I would really appreciate it if you check them out if you haven't already. ⭐️Russell B. and ✭ Charity --- What the Fixedops podcast Chris and Peaches --- 2 Be Better podcast Kaylee Felio🌻 --- The Parts Girl podcast Shasta and Jess --- Chicks in Charge Jay Goninen --- Beyond the Wrench Dave Foy --- Fixed Ops Mastermind Joe and Erick --- Service Drive Live Jeff Compton --- Jaded Mechanic Paul Meijer --- Sunday Night Live Corey Smith --- Fixed Ops 5

The Wrench Turner's Podcast - 10 Mill Mastery S6 Ep1 - Shop Conflict
Shop Conflict... Is it happening on your floor?
This week's 10 Mill Mastery Topic:
How we identify and potentially resolve shop conflict
Wrench Turners Podcast
10 Mill Mastery Edition
Series 6 Episode 1
The lads:
Marshall Sheldon
Richard Mueller RSE
Stephan Dos Santos
...Folks, you'll notice I've chopped a LOT of extras as part of my effort to reduce any time spent during production that I don't believe adds value to the content. If you feel something is "missing", please let me know in the comments, and I'll happily bring it back.
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners
www.wrenchturners.online
We help Service Leaders elevate technicians and revenue.
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.
PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: https://bit.ly/3GsBnI2

The Wrench Turner's Podcast - 10 Mill Mastery S5 Ep4 - Identifying Insecurity
"Can I take your top performer to lunch?" - Russell Wickham This week's 10 Mill Mastery Topic: How we 10 Mill Masters identify insecure Service Leaders. Wrench Turners Podcast 10 Mill Mastery Edition Series 5 Episode 4 The lads: Marshall Sheldon Richard Mueller RSE Russell Wickham If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏 j. —- I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners I help Service leaders elevate revenue and technicians with data. Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level. PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: https://bit.ly/3GsBnI2

The Wrench Turner's Podcast - Mechanic Minute - Aug 10 - 2023 - Read
Elevating your shop life? Wrench Turners Podcast Mechanic Minute Edition Read If you enjoyed this episode or any of the WTP episodes, we would really appreciate it if you shared and rate it on whichever platform you use most! j. —- I'm Joshua Taylor. Business Development at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level. PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: https://bit.ly/3GsBnI2

Wrench Turners Podcast with Alex Kraft
Sales sells the first Machine, and Service sells the second. This week on Wrench Turners Podcast Alex Kraft Founder Heave (Uber for Heavy Equipment) https://www.heave.co/ In today’s episode, we talk about: ✅ Fast Diagnostics ✅ Bringing heavy equipment into the 21st century ✅ Setting your own rates If you enjoy listening or watching the Wrench Turners Podcast we’d appreciate it if you shared and rated the episode on whichever platform you use most! j. —- I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level. PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: https://bit.ly/3GsBnI2 http://wrenchturners.online

The Wrench Turner's Podcast - 10 Mill Mastery S5 Ep3 - Tracking Wins
This week's 10 Mill Mastery Topic:
How to track your wins and what it means
Wrench Turners Podcast
10 Mill Mastery Edition
Series 5 Episode 3
The lads:
Marshall Sheldon
Richard Mueller RSE
Russell Wickham
If you enjoyed this week’s episode, we would appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow! 🙏
j.
—-
I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners
I help Service leaders elevate revenue and technicians with data.
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.
PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: bit.ly/3GsBnI2
www.wrenchturners.online

The Wrench Turner's Podcast - Coaches Corner - Episode 17 - 5 steps to care more
Mechanics that care make more money. Find out how by watching, or reaching out to me directly. j. https://wrenchturners.online/

The Wrench Turner's Podcast - Mechanic Minute - Aug 3 - 2023 - Technology
One thing that trumps Technology in the Service Department? Wrench Turners Podcast: Mechanic Minute edition This week: Technology If you enjoyed today's or any WTP content, we would appreciate it if you could comment or share the audio/video with your team to improve their day as well. j. #leadership #mechanic #podcast Joshua Taylor Email: joshua@justworkhard.com Cell: 1-416-550-7691 Web: www.wrenchturners.online

The Wrench Turner's Podcast with Freddy Trujillo
No one in automotive works long hours...
This week on Wrench Turners Podcast
Service Manager
In today’s episode, we talk about:
✅ Pain vs Pay
✅ Don't ignore your idle capitol
✅ Treat the car with respect to get return clients
If you enjoy this week’s episode or any of the WTP episodes, we’d appreciate it if you shared and rated the episode on whichever platform you use most!
j.
—-
I'm Joshua Taylor. Business Dev at FixedOPS Marketing + What the Fixed Ops?! Podcast and Founder of Wrench Turners
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.
PS. I write a Mechanic focused, bi-weekly article too, you can join 1600+ others and sign up here: https://bit.ly/3GsBnI2

The Wrench Turner's Podcast - 10 Mill Mastery - Live - Flat-Rate Solutionary Discussion
Live and Raw - The unedited, non-trimmed Live event recording the lads and I hosted on July 23rd through YouTube.
We talked about bay mates, payscales, cake, HVL's and more.
Thank you for tuning in every week, we really appreciate it!
j.


The Wrench Turner's Podcast - 10 Mill Mastery S5 Ep2 - What's your Value?
"I want 30% of your ELR" - Russell Wickham
This week's 10 Mill Mastery Topic:
How to add or understand your value as a technician.
Wrench Turners Podcast
10 Mill Mastery Edition
Series 5 Episode 2
The lads:
Marshall Sheldon
Richard Mueller RSE
Russell Wickham
If you enjoyed this week’s episode or any of the WTP episodes, we’d appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow. 🙏
j. —- I'm Joshua Taylor Founder of Wrench Turners Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to turbocharge your Technician team. #leadership #mechanic #podcast

The Wrench Turner's Podcast - Coaches Corner - Episode 16 - Stop Whining
If you're a Mechanic in Automotive, and you work in a dealership setting with flat-rate pay, you've probably whined to your leader about warranty times. Don't whine. Dissect your labour, and understand how you are generating the hours, then, and only then, can we have a civilized and professional conversation about how, what, and where to improve.
Find the full video episode on YouTube:

The Wrench Turner's Podcast - Mechanic Minute - July 13 - 2023 - Shut up, period.
I'm upset and almost crossed a line...
Wrench Turners Podcast
Mechanic Minute Edition
Shut up, period.
You can find it on Spotify:
or on YouTube:
j.
—-
I'm Joshua Taylor Founder of Wrench Turners
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to take your Technician Team to the next level.
#leadership #mechanic #podcast

The Wrench Turner's Podcast with Anna Erliha
4 meters is 13 feet…
This week on Wrench Turners Podcast
Anna Ērliha
Mechanic
In today’s episode, which takes us outside North America, we talk about:
✅ Mechanic as a second language
✅ Overcoming the traditional stereotypes
✅ Creating your own path
If you enjoy this week’s episode or any of the WTP episodes, we’d appreciate it if you shared and rated the episode on whichever platform you use most!
j.
—-
I'm Joshua Taylor Founder of Wrench Turners
Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to turbocharge your Technician team.
#leadership #mechanic #podcast

The Wrench Turner's Podcast - 10 Mill Mastery S5 Ep1 - Tool Spend
"as long as my wife isn't listening...." - Richard Mueller RSE This week's 10 Mill Mastery Topic: How much do Technicians spend on tools? Wrench Turners Podcast 10 Mill Mastery Edition Series 5 Episode 1 The lads: Marshall Sheldon Richard Mueller RSE Russell Wickham If you enjoyed this week’s episode or any of the WTP episodes, we’d appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow. 🙏 j. —- I'm Joshua Taylor Founder of Wrench Turners Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to turbocharge your Technician team. #leadership #mechanic #podcast www.wrenchturners.online

The Wrench Turner's Podcast - Coaches Corner - Episode 15 - Door Rate
Service Leaders: Less than 50% of your Technicians know this... and it's costing you money, and business. Listen, or watch this week's Coaches Corner on Spotify or YouTube to find out how to find, and correct this barrier. j. www.wrenchturners.online

The Wrench Turner's Podcast - Mechanic Minute - July 06 - 2023 - Bay Mates
You spend so much time with these people, why not find out about them?
Wrench Turners Podcast
Mechanic Minute Edition
Bay Mates
j.
—-
I'm Joshua Taylor
Follow me on LinkedIn for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor.
#leadership #mechanic #podcast?

The Wrench Turner's Podcast with Dale Pettigrew
Mechanics: “....what would happen if” is a great way to figure out the challenge you’re working with, but please don’t also use the phrase “hold my beer” This week on Wrench Turners Podcast Dale Pettigrew Dealer Technical Support Manager Nissan Motor Corporation In today’s episode, we talk about: ✅ Diversity of Knowledge ✅ Seek first to understand ✅ Check pins before calling Dale ✅ Stay Curious If you enjoy this week’s episode or any of the WTP episodes, we’d appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow. 🙏 j. —- I'm Joshua Taylor Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section to turbocharge your Technician team. #leadership #mechanic #podcast

The Wrench Turner's Podcast - 10 Mill Mastery S4 Ep4 - Tesla Destroying competition or just Big 3 PR
“The '80s are calling...” - Richard Mueller RSE "We have all the same EV stuff as Automotive, but it's terrible" - Marshall Sheldon This week's 10 Mill Topic: Sustainable EV adoption from Ford Motor Company and General Motors or is Tesla destroying the competition? Wrench Turners Podcast 10 Mill Mastery Edition Series 4 Episode 4 The lads: Marshall Sheldon Stephan Dos Santos Richard Mueller RSE Russell Wickham Joshua Taylor Thank you for watching, sharing, and subscribing! j. www.wrenchturners.online

The Wrench Turner's Podcast - Coaches Corner - Episode 14 - Your phone is costing you money!!!
1, 2, 3, 4, Swoosh. Making more money with the time you have is that easy. J. Joshua Taylor Email: leader@justworkhard.com Web: www.wrenchturners.online #coach #mechanic #podcast

The Wrench Turner's Podcast - Mechanic Minute - June 29 - 2023 - Defensiveness
How fast do you get into a defensive posture? Wrench Turners Podcast: Mechanic Minute edition This week: Defensiveness If you enjoyed today's or any WTP content, we would appreciate it if you could comment or share the audio/video with your team to improve their day as well! j. #leadership #mechanic #podcast Web: www.wrenchturners.online

The Wrench Turner's Podcast with Ansley Williams
Service Leaders: “Don’t put me on the book cover”
-Ben Alexander
This week on @wrench turners Podcast
Ansley Williams
Chief Revenue Officer
Cascade Development Consulting Inc
In today’s episode, we talk about:
✅ The pull of Automotive
✅ 3-Year-old Explanations
✅ Enjoying being the Road Warrior
Tune in 4x a week for a new episode of The Wrench Turner’s Podcast where we talk with industry experts, Mechanics, and Service Leaders to help mechanics across the globe be happier, healthier, and more productive on the shop floor.
J.
Ansley Williams
(503)913-9736
#mechanic #podcast #leadership

The Wrench Turner's Podcast - 10 Mill Mastery S4 Ep3 Can we identify our own burnout?
“I’m there” - Russell Wickham This week's 10 Mill Topic: Can we identify our own burnout? Wrench Turners Podcast 10 Mill Mastery Edition Series 4 Episode 3 The lads: Marshall Sheldon Stephan Dos Santos Richard Mueller RSE Russell Wickham If you enjoyed this week’s episode or any of the WTP episodes, we’d appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow. 🙏 j. —- I'm Joshua Taylor Click my name + follow + 🔔 for Daily Content to help Mechanics lead happier, healthier, and more productive lives on the shop floor, or check my featured section for more information. #leadership #mechanic #podcast?

The Wrench Turner's Podcast - Coaches Corner - Episode 13 - The Ideal Mechanic Hours per RO is...
This is as close to perfect as it gets... In this Wrench Turners Podcast - Coaches Corner Edition, I review the details of a technician with the ideal productivity and low-stress level. J. Joshua Taylor Email: leader@justworkhard.com Web: www.wrenchturners.online #coach #mechanic #podcast Interested in being on the podcast, purchasing a Wrench Turner's Wellness Survey for your store, Participating in a Reverse Interview, or perhaps having a coaching session with me? Discovery sessions are free, with no obligation, and no pressure. Mechanics find a time here: http://bit.ly/40SspLy Leaders find a time here: https://bit.ly/WTLDisc Lastly, I humbly ask that you share the show and listen with as many folks as possible!

The Wrench Turner's Podcast - Mechanic Minute - June 12 - 2023 - Top 'O Funnel
How can Mechanics help Service Leaders fill the Top of the Funnel, and what can they do to do more with what they have when it's getting lean.
Wrench Turners Podcast:
Mechanic Minute edition
This week: Top 'O Funnel
If you enjoyed today's or any WTP content, we would appreciate it if you could comment or share the audio/video with your team to improve their day as well.
j.
#leadership #mechanic #podcast Need to grow your Technician's output?
If you're a Service Leader seeking to grow your technician team flagged hours, DM me.
PS. I write a free bi-weekly newsletter Wrenches for Wrenches, put out daily content, and post 4x a week to Spotify and YouTube, drop me a line if you have questions.
Resources Referenced:
Becc Holland
#coach #mechanic #podcast
Joshua Taylor
Email: joshua@justworkhard.com
Cell: 1-416-550-7691
Web: www.wrenchturners.online

The Wrench Turner's Podcast - with Loren Mejia
"Is it a Jag Jag or a Ford Jag?"
This week on Wrench Turners Podcast
Loren Mejia
BMW of North America, LLC Master Technician
Certified AUDI AG Technician
Certified JLR Technician
MBI Motors
On the episode today, we talk about the following:
✅ BMW owners not using signals
✅ Swallowing hard nuts
✅ Printing the book
Tune in every Wednesday for a new episode of The Wrench Turner’s Podcast where we talk with industry experts, Mechanics, and Service Leaders to help mechanics across the globe be happier, healthier, and more productive on the shop floor.
j.
——I'm Joshua Taylor I help Automotive Service Managers remove uncommon barriers to Technician production.

The Wrench Turner's Podcast - 10 Mill Mastery - S4 - Ep 2 - How do we help leaders pick new Apprentices?
“Are they actually happy to be at the interview?” - Stephan Dos Santos This week's 10 Mill Topic: How do we help leaders pick new Apprentices? Wrench Turners Podcast 10 Mill Mastery Edition Series 4 Episode 2 The lads: Marshall Sheldon Stephan Dos Santos Richard Mueller RSE Russell Wickham If you enjoy this week’s episode or any of the WTP episodes, we’d appreciate it if you shared the episode on whichever platform you use most to get it in front of as many Technicians as possible or, leave a rating on that platform to help us grow. 🙏 j. #leadership #mechanic #podcast www.wrenchturners.online

The Wrench Turner's Podcast - Coaches Corner - Episode 12 - A secret to be a Successful Mechanic
What if I told you that the secret to becoming a successful mechanic lies in comprehending the underlying principles behind every subject? In this Wrench Turners Podcast - Coaches Corner Edition, I go over the succession of success for Mechanics through long-term training. J. Joshua Taylor Email: leader@justworkhard.com Web: www.wrenchturners.online #coach #mechanic #podcast Interested in being on the podcast, purchasing a Wrench Turner's Wellness Survey for your store, Participating in a Reverse Interview, or perhaps having a coaching session with me? Discovery sessions are free, with no obligation, and no pressure. Mechanics find a time here: http://bit.ly/40SspLy Leaders find a time here: https://bit.ly/WTLDisc Lastly, I humbly ask that you share the show and listen with as many folks as possible!

The Wrench Turner's Podcast - Mechanic Minute - June 15 - 2023 - Separation...
"Don't take work home with you"
That isn't the only direction emotion can affect your day.
Wrench Turners Podcast:
Mechanic Minute edition
This week: Separation...
Have a listen here:
http://bit.ly/3v4mx3E
Or watch it here:
https://bit.ly/3M5RkVM
J.
#podcast
---
I'm Joshua Taylor a #mechanic #coach
Click my name + follow + 🔔
Need to grow your Technician's output?
If you're a Service Leader seeking to grow your technician team flagged hours, DM me.
PS. I write a free bi-weekly newsletter Wrenches for Wrenches, put out daily content, and post 4x a week to Spotify and YouTube, drop me a line if you have questions.
Resources Referenced:
#coach #mechanic #podcast
Joshua Taylor
Email: joshua@justworkhard.com
Cell: 1-416-550-7691
Web: www.wrenchturners.online
YouTube: https://bit.ly/3OPIU87
Interested in being on the podcast, purchasing a Wrench Turner's Wellness Survey for your store, Participating in a Reverse Interview, or perhaps having a coaching session with me? Discovery sessions are free, with no obligation, and no pressure.
Mechanics find a time here: http://bit.ly/40SspLy
Leaders find a time here: https://bit.ly/WTLDisc

The Wrench Turner's Podcast - with Javier Ros
"You possess your possessions or they possess you" - Switchfoot
This week on Wrench Turners Podcast
Javier Ros
Sales and Business Development
DealerAPS
In today’s episode, we talk about the following:
✅ 1 of 8 Children
✅ Treating Service like Sales; a growth mindset
✅ Disconnect
You can find the Episode on Spotify here:
http://bit.ly/3v4mx3E
or find Wrench Turners Videos on YouTube here:
https://bit.ly/3M5RkVM
Tune in every Wednesday for a new episode of The Wrench Turner’s Podcast where we talk with industry experts, Mechanics, and Service Leaders to help mechanics across the globe be happier, healthier, and more productive on the shop floor.
j.
#mechanic #coach #podcast
——
Click Joshua Taylor + Follow + 🔔 for the best Mechanic advice on LinkedIn!
I help Service Managers remove uncommon
barriers to Technician production.
Contact: leader@justworkhard.com

The Wrench Turner's Podcast - 10 Mill Mastery - S4 - Ep 1 - To train or not to train?
In today’s episode, Richard brings up the question, what do we do as shop leaders if a technician asks for training, but is planning to leave?
Wrench Turners Podcast
10 Mill Mastery Edition
My 10mm guests for Series 4:
Marshall Sheldon
Stephan Dos Santos
Richard Mueller RSE
Russell Wickham
Thank you very much for commenting, subscribing, watching, and listening folks, we really appreciate it!
You can check out last week's episode, it's now on YouTube: https://youtu.be/nIvxOSxNFGs
website www.wrenchturners.online
j.
#leadership #mechanic #podcast

The Wrench Turner's Podcast - Coaches Corner - You're not the problem if...
If your Service Leader is not doing these things, perhaps you need to find another store...
Referenced:
The Reverse Interview with Zack Pirkl: https://bit.ly/3Nn20Bk
WTWS Demo: https://bit.ly/3vibWCa
Listen on Spotify: https://bit.ly/3N8kc1A
J.
Joshua Taylor
Email: leader@justworkhard.com
Web: www.wrenchturners.online
#coach #mechanic #podcast
Interested in being on the podcast, purchasing a Wrench Turner's Wellness Survey for your store, Participating in a Reverse Interview, or perhaps having a coaching session with me? Discovery sessions are free, with no obligation, and no pressure.
Mechanics find a time here: http://bit.ly/40SspLy
Leaders find a time here: https://bit.ly/WTLDisc
Lastly, I humbly ask that you share the show and listen with as many folks as possible!

The Wrench Turner's Podcast - Mechanic Minute - June 8 - 2023 - It's in the Details
Do you know the details? Are you communicating the Details? Are the details relevant to you as a Mechanic? The Wrench Turner’s Podcast: Mechanic Minute edition This week: It's in the Details. Thank you for listening folks, I appreciate it. J. #coach #mechanic #podcast Joshua Taylor Email: joshua@justworkhard.com Cell: 1-416-550-7691 Web: www.wrenchturners.online YouTube: https://bit.ly/3OPIU87 Interested in being on the podcast, purchasing a Wrench Turner's Wellness Survey for your store, Participating in a Reverse Interview, or perhaps having a coaching session with me? Discovery sessions are free, with no obligation, and no pressure. Mechanics find a time here: http://bit.ly/40SspLy Leaders find a time here: https://bit.ly/WTLDisc Lastly, I humbly ask that you share the show and listen with as many folks as possible!

The Wrench Turner's Podcast - with Robert Stage

The Wrench Turner's Podcast - 10 Mill Mastery - Getting apprentices involved in training
Wrench Turners Podcast
10 Mill Mastery Edition
My 10mm guests for Series 3:
Marshall Sheldon
Stephan Dos Santos
Richard Mueller RSE
Also, you can find last week's episode, Series 3 - Episode 2, as well as a whole host of other channel videos on YouTube:
bit.ly/43aO3fb
Thank you very much for subscribing, watching, and listening folks, we really appreciate it!
j.
#leadership #mechanic #podcast